Paper Shredder/CS06-T/Pencincang Kertas/Mesin Potong Kertas/Strong Cutter Machine Shredded/Document Shredder

SAFETY INSTRUCTIONS
Read the operating manual carefully before starting up the shredder!
- Ensure that the voltage and frequency of the power supply correspond to the data on the rating plate!
- Incorrect voltage may result in destruction of the unit!
- The socket must be easily accessible
- Do not open the housing lid! This can cause serious injury like electric shock! The inner parts cannot be maintained.
- Repairs are to be effected by qualified after-sales service staffonly, or else the warranty of this machine is no longer valid. The safety devices must not be removed or manipulated.

OPERATION
Remove all staples and paper clips! This will extend the shredders life. Max. capacity = 6 sheets at the same time (80 g/m)!
1. Set the switch to "AUTO". Put the plug in a power socket.
2. The shredder switches on automatically when a sheet of paper is fed into feed aperture. It stops once the sheet has passed through.
3. Do not set the switch to REVERSE (REV) when shredding a Credit Card, otherwise the shredder may be damaged. The shredder cannot shred paper and a Credit Card at the same time and can only shred one Credit Card at once.
4. When shredding small material like Credit Cards or receipts, insert them in the middle of the paper feed opening.

WHAT TO DO WHEN A PAPER JAM OCCURS
1. a. If the shredder fails because of a paper jam, set the switch to REVERSE (REV).
2. Remove the rejected paper and feed less sheets into the shredder. Never pull paper out the shredder, this will damage the cutters.
3. Should it occur the shredder does not react to anything then it is very likely that the motor is overheated. Try the previous steps again after 30 to 40 minutes.

TECHNICAL DATA
Cutting capacity: Max. 6 sheets of A4 (80 g/m)
Cutting method, cut width: Strip-cut, 6 mm
Shredding speed: 2.5 - 3.0 m/min
Width of paper infeed: 220 mm
Continuous operation time: 2 min
Noise level: 73 dB (A)
Range of operations: Auto start/Auto stop, Reverse Running, Off
Dimension (W x D x H): 310-380 x 145 x 290 mm
Weight: 1.7 kg
Power Supply: 220 - 240 V / 50 Hz
Rated input power 0.9A